Drummotors
Advantages:
- Hardened and grinded gears to keep noise level low and increase lifetime significantly.
- Bolted endflanges. Easy to dismantle in case it might be necessary.
- Module of the gears are always at least one size bigger then usually to make them more suitable for even the hardest application.
- Robust cast iron end flanges, gear housing, stator housing and motor flanges.
- Completely manufactured and assembled in our own factory.
- Short delivery times in case of emergency (large stock of standard components).
|
Drummotor type |
TM 100B25 |
TM 113B25 |
TM 127.25 |
TM 138.25 |
TM 160.25 |
TM 160.30 |
TM 215.30 |
TM 215.40 |
TM 215B50 |
| Drum diameter (mm) |
100 |
113 |
127 |
138 |
160 |
160 |
215 |
215 |
215 |
| Shaft diameter (mm) |
25 |
25 |
25 |
25 |
25 |
30 |
30 |
40 |
50 |
|
Power (kW) |
0.05-0.37 |
0.04-0.55 |
0.10-1.1 |
0.10-1.1 |
0.10-0.75 |
0.10-2.2 |
0.10-2.2 |
0.37-5.5 |
1.5-4.0 |
|
Speed (m/s) |
0.007-3.60 |
0.008-4.40 |
0.008-2.60 |
0.009-2.80 |
0.13-3.30 |
0.06-4.00 |
0.08-5.30 |
0.12-4.70 |
0.18-0.31 |
|
Drummotor type |
TM 273.40 |
TM 315.40 |
TM 315.50 |
TM 400A50 |
TM 400.60 |
TM 500A60 |
TM 500A75 |
TM 620A75 |
|
| Drum diameter (mm) |
273 |
315 |
315 |
400 |
400 |
500 |
500 |
620 |
|
| Shaft diameter (mm) |
40 |
40 |
50 |
50 |
60 |
60 |
75 |
75 |
|
|
Power (kW) |
0.37-5.5 |
0.37-5.5 |
1.1-11 |
1.1-11 |
1.5-22 |
1.5-22 |
11-30 |
11-30 |
|
|
Speed (m/s) |
0.17-5.00 |
0.18-5.20 |
0.16-4.40 |
0.20-4.80 |
0.20-4.60 |
0.25-4.70 |
0.80-3.20 |
1.00-3.90 |
Descriptions by type: http://www.vandergraafpte.nl/products_en.html?pmCatId=3
